Flue Gas Treatment
Fabric filter cleaning system

Part of our digital ecosystem Kanadevia Inova Pulse

Introduction

A simple and independent system for intelligent monitoring, control and optimisation

  • ensuring high maintenance convenience and effectiveness

  • lowering operational costs

  • increasing plant availability and performance

The fabric filter control and optimisation solution monitors, controls and manages the cleaning of filter bags. Filter malfunctions are reported instantly to the operator. The system optimises the service life of filter bags, minimises cleaning air consumption and simplifies maintenance. It’s easy to use and highly flexible.

Cleaning pressure adjustment (patented)

The filter cleaning system uses an electro-pneumatic air pressure regulator to lower the cleaning pressure whenever possible and increase the cleaning pressure during high-demand peaks. This saves electricity and helps extend the lifetime of the filter bags.

Filter bag monitoring

The filter cleaning system uses the volumetric flow to calculate the current gas flow speed and work out the time required for a cloud of particulate emissions from chamber X to reach the sensor. If a bag is damaged, the particulate signal exceeds the monitoring threshold set in the system. In this case, a malfunction message is generated, precisely localising the filter bag line in question. Changes in the particulate signal over longer observation periods also enable the lifetime of filter bags to be predicted.

Advantages for you

  • Precise cleaning of filter bags evens out the load on filter surfaces.

  • Faulty valves are detected and pinpointed immediately.

  • Early detection and localisation of defective filter bags enables rapid intervention.

  • Saving electrical energy for cleaning air and extending the bag's lifetime.

  • Comprehensive monitoring facilitates condition-based maintenance.

  • Short, plannable inspection windows.

  • Easy to use locally, via a distributed control system, or remotely.

Download the brochure
Fabric filter

Fabric filter installation

Talk to an expert

contact us

Malte Norgaard
Malte Norgaard
Sales Manager Digital Solutions
Hardturmstrasse 127
8005 Zürich, Switzerland
dss.sales@kanadevia-inova.com

Contact Form

Send message
Overview of our digital ecosystem Kanadevia Inova Pulse
Kanadevia Inova Pulse

Other related digital products

Waste to X

Other related flue gas treatment products

Waste to X

Further related technologies

Grate Combustion systems

The combustion system is the best-proven thermal waste treatment technology for mixed municipal, industrial or hazardous waste, and the heart of any modern, state-of-the-art Waste to Energy (WtE) plant.

Flue gas treatment

Incinerating waste produces exhaust gases laden with diverse pollutants. Different processes are used to remove these pollutants before the purified flue gas leaves the plant safely through the stack.

Carbon capture

Capturing carbon dioxide (CO2) from the flue gas produced in hard-to-abate industries and properly storing it (a process called carbon capture and storage or CCS) is a key component of most governments’ net-zero strategies.

Energy recovery

Recovering the energy content of waste is a key component of WtE technology. Since the process is largely renewable and involves only a low level of emissions, it also helps significantly reduce greenhouse gases.

Residue treatment

Thermal waste treatment produces residues which can be either reused or landfilled. The principal components are slags and ashes, consisting mostly of non-combustible waste constituents such as glass, minerals or scrap metals.

EcoFlex™ WtE plant solution

The new pre-engineered EcoFlex™ solution provides a modern waste infrastructure based on proven in-house technologies, allowing a cost-optimised design of single-line Waste to Energy plant construction and operation.